TPS Copper Pipe Tapping Saddle

Hot Tapping Service Saddles for Copper Pipe

A New Easy-to-Use Small Diameter Hot Tapping Saddle

We are dedicated to providing innovative products designed to save time, labor and inventory dollars in the water and wastewater piping industries.

The latest entry in this ever-growing product portfolio is the Quick Cam Hot Tapping Saddle.

The Quick Cam Hot Tapping Saddle includes numerous features to assist in hot tapping 3/4” through 4" diameter CTS and IPS diameter pipes. The Quick Cam Hot Tapping Saddle exceeds all industry standards, including AWWA CSOO and is built to accommodate copper and steel pipe diameters on all pipe materials.

Since the Quick Cam Hot Tapping Saddle is equipped with a unique side-on­ slide-off lug system, it is well suited for use in tight workspace conditions. The heavy duty cast lug is equipped with An integrated handle and thumb-hold that allows it to be easily carried, mounted and tightened to the pipe in just about any close space situation. This product provides a user-friendly system, which reduces installation time and effort. Moreover, the outlet design features a stronger spin-extruded branch with higher strength welds to resist the stresses and strains of valve installation and hot tapping.

Patents have been applied for this unique tug system.

TPS Saddle Instructions and Specs.pdf

Click the following link if you need fittings for PVC and Steel pipe saddles

Tested and Certified Water Quality Under Industry Standards NSF/ANSI 61 Copper, PVC, Steel Pipe Outside Diameter Pipe Fittings Front View Copper, PVC, Steel Pipe Outside Diameter Pipe Fittings Bottom View Copper, PVC, Steel Pipe Outside Diameter Pipe Fittings Side View
 

TPS Copper Saddle Specifications

Hot Tapping Saddles are used for tapping copper pipeline.

Diameter Sizes: 3/4", 1", 1 1/4", 1 1/2", 2, 2 1/2", 3" & 4"
Pressure Rating: Up to 150-PSI Maximum Working Pressure depending on diameter. Call factory for additional information. (Test pressures up to 300 psi)
Temperature Rating: Maximum Continuous Working Temperature range of 212 Degrees F.
Gasketing: NBR temperature rated to 180 F or EPDM temperature rated to 212' F working temperature.
Shell: Heavy Duty 20 gauge band of Type 304, 18-8 Stainless Steel, Fully Passivized for Corrosion Protection.
Spanner: Heavy Duty 16 or 18 gauge Type 304, 18-8 Stainless Steel.
Alignment Lugs: Heavy Duty Cast Type 304,18-8 Stainless Steel with en easy "P" slotted slide-on-slide-off assembly.
Branch Connections: External Threaded 3/4” to 4” (NPT Thread Pitch) Type 304, 18-8 Stainless Steel Outlets Standard. (Internal Threaded Outlets Available on Request)
Bolts/Washers: Type 304 Stainless Steel Bolt threads 5/8” Rolled, coated with Fluoropolymer Coating to prevent galling.
Nuts: Type 316 Stainless Steel coated with Fluoropolymer Coating to prevent galling.
Body 100% insulated from ductile iron or carbon steel pipe materials.
Patent Pending Cam Lug Fingers for Extended Range.
Note: Product Pressure, Temperature and Bolt Torque can vary depending on Product Diameter, Type of Connection and Pipe Materiel Being Utilized.
Note: The Pressure Rating, Temperature and Bolt Torque shown on product label are the actual ratings or the particular product.
NOTE: The TPS saddles compare to the 499 saddle version

TPS Saddle Submittal Drawing.pdf