All Tapping Hole Saws & Hottap Cutters |
|
| STHS “Double-Tooth” .125 Cutters (carbide) | |
| High quality brazed carbide hole saws have been made in the U.S.A. for over 50 years by Relton. Each hole saw has actual carbide teeth brazed into the steel body. This cutter is engineered to cut concrete cylinder pipe, ductile iron pipe, trench duct, cellular metal, and all types of ferrous and non-ferrous metals, where an interrupted cut may occur. This cutter can be used wet or dry, and can be used in a hand-held or in a stationary hot tapping machine. We manufacture custom sizes, even in one-piece quantities, in most diameter or drilling depths. Please call us at 1-800-279-5659 for special-order information. If your job requires a large number of holes, lower your costs per hole with one of our STHS carbide tipped cutters. If you burn up high-speed hole saws, or if bi-metal hole saws aren’t enough, our cutters are for you! This type of cutter is compatible with 2lbin.com’s T-24E, T-30, T-37, T-47+ and the T-112 Hot Tapping Machines |
|
| Carbide Tipped PVC Hole Saw Cutters | |
| Diamond Tip Bit Hole Saw Cutters | |
| Carbide Tipped Hole Saw Cutters | |
| Blu-Mol® Carbide-Tipped Hole Saw efficiently cuts abrasive materials with greater heat and wear resistance than bi-metal saws. Aggressive cut with three teeth per inch. | |
| Bi-Metal Hole Saw Cutters | |
| Blu-Mol® Standard Bi-Metal Hole Saws, feature high speed steel teeth, for a sharper and longer lasting tool, and are suitable for both wood and metal cutting. | |
| Double Stack Hole Saws Bi-Metal | |
|
|
|
| Tungsten Carbide Grit Hole Saw Cutters | |
| Double Stack Hole Saws Carbide-Tipped | |
|
|
|
Leave us a Facebook Comment