Pipe Hot Tap Saddles, Sleeves and Fittings

Hot, Wet, or Pressure Tapping Saddles for Hot Tapping *All sales final for tapping saddles sold, effective 1-1-2011
	TPS Quick Cam Copper Pipe Hot Tap Saddles, Sleeves and Clamps
Click for more information	The TPS Quick Cam Hot Tapping Saddle, Sleeves and Clamps includes numerous features to assist in hot tapping ¾” through 4" diameter Copper Tubing Size (CTS) diameter pipes. These hot tap sleeves exceed all industry standards, including AWWA CSOO and is built to accommodate copper, pvc and steel pipe diameters on all pipe materials.The maximum pressure for these fittings is 150 PSI and a temperature rating of EPDM or BUNA rubber gaskets. Diameter Sizes: ¾”, 1”, 1 ¼”, 1 ½”, 2, 2½”, 3” & 4” Pressure Rating: Up to 150-PSI Maximum Working Pressure depending on diameter. Call factory for additional information. (Test pressures up to 300 psi) Temperature Rating: Maximum Continuous Working Temperature range of 212 Degrees F. Gasket: NBR temperature rated to 180 F or EPDM temperature rated to 212' F working temperature. Shell: Heavy Duty 20 gauge band of Type 304, 18-8 Stainless Steel, Fully Passivized for Corrosion Protection.

Click for more information
	PVC & Steel Pipe Hot Tapping Saddles, Sleeves and Clamps
	The TPS Quick Cam Hot Tapping Saddle, Sleeves and Clamps includes numerous features to assist in hot tapping ¾” through 4" diameter Iron Pipe Size (IPS) diameter pipes. These hot tap sleeves exceed all industry standards, including AWWA CSOO and is built to accommodate PVC and steel pipe diameters on all pipe materials.The maximum pressure for these fittings is 150 PSI and a temperature rating of EPDM or BUNA rubber gaskets. Diameter Sizes: ¾”, 1”, 1 ¼”, 1 ½”, 2, 2½”, 3” & 4” Pressure Rating: Up to 150-PSI Maximum Working Pressure depending on diameter. Call factory for additional information. (Test pressures up to 300 psi) Temperature Rating: Maximum Continuous Working Temperature range of 212 Degrees F. Gasket: NBR temperature rated to 180 F or EPDM temperature rated to 212' F working temperature. Shell: Heavy Duty 20 gauge band of Type 304, 18-8 Stainless Steel, Fully Passivized for Corrosion Protection.

Click for more information
	TPS Copper, PVC & Steel Pipe Tapping Saddles for Linestops
	Diameter Sizes: 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2 ,3 ,4 Pressure Rating: Up to 150 PSI Maximum Working Pressure depending on diameter. Call factory for additional information (Test Pressures up to 300 PSI) Temperature Rating: Maximum Continuous Working Temperature range of 212 Degrees F. Gasketing: NBR temperature rated to 180° F. or EPDM temperature rated to 212° F. working temperature Shell: Heavy Duty 20 gauge band (depending on diameter) of Type 304, 18-8 Stainless Steel, Fully Passivated for Corrosion Protection Spanner: Heavy Duty 16 or 18 gauge Type 304 18-8 Stainless Alignment Lugs: Heavy Duty Cast Type 304, 18-8 Stainless Steel with an easy "P" slotted slide on slide off assembly Branch Connections: Type 304 18-8 Stainless Steel Thread-0-Lets available in 3/4" to 4" in diameter (NPT Thread Pitch) Completion Plug: Brass, Stainless Steel or Carbon Steel with "O" Ring Seal where needed Optional Completion Cap: Ductile iron material unless otherwise specified Bolts/Washers: Type 304 Stainless steel, Bolt threads 5/8" Rolled, coated with Fluoropolymer Coating to prevent galling Nuts: Type 316 Stainless Steel coated with Fluoropolymer Coating to prevent galling Body 100% Insulated from Ductile Iron Produced in the USA NOTE: The TPS saddles compare to the 499 saddle version

Click for more information	402 Double Strap Service Saddle
Click for more information	Service Saddles provide a quick, dependable means of tapping pipe for branch connections of 1/2” through 2-1/2”. Use of economical JCM Service Saddles eliminates problems common to direct taps, such as leaking threads or split pipe, and reinforces the critical connection. High pressure performance is assured by the broad, pressure activated gasket. Permanently set in a retaining cavity, the contoured gasket produces a positive initial seal which improves with an increase in line pressure. These service saddles are designed for maximum safety and performance. The wrap around design, wide skirt and wide straps support and reinforce the pipe while providing excellent stability to the saddle. The heavy duty design of these saddles provides strength and mass for long term service. The 402 and 406 saddles, with their wide bodies, and large sealed outlet areas, provide an excellent means of repairing holes, pin holes, and leaking through 3/4" and 1" direct taps.

Click for more information
	406 Double Stainless Strap Service Saddle
	Service Saddles provide a quick, dependable means of tapping pipe for branch connections of 1/2” through 2-1/2”. Use of economical JCM Service Saddles eliminates problems common to direct taps, such as leaking threads or split pipe, and reinforces the critical connection. High pressure performance is assured by the broad, pressure activated gasket. Permanently set in a retaining cavity, the contoured gasket produces a positive initial seal which improves with an increase in line pressure. These service saddles are designed for maximum safety and performance. The wrap-around design, wide skirt, and wide straps, support and reinforce the pipe while providing excellent stability to the saddle. The heavy duty design of these saddles provides strength and mass for long term service. The 402 and 406 saddles, with their wide bodies, and large sealed outlet areas, provide an excellent means of repairing holes, pin holes, and leaking through 3/4" and 1" direct taps.

Click for more information	412 Carbon Steel Tapping Saddle
Click for more information	Built in range assures proper fit on more than one class of pipe - reducing inventory requirements and the chance of not having the right size sleeve. Ease of assembly eliminates extra equipment, time, and specially trained personnel. Ready availability means taps can be made with out long delays - even taps on special sizes of pipe - or services requiring high pressure flanges. .

Click for more information
	415 Concrete Cylinder Tapping Sleeve
	The 415 tapping sleeve for "Concrete Steel Cylinder Pipe" is the standard in the industry for fast and safe taps on concrete pressure pipe. Designed to meet the AWWA M-9 Manual, the 415 is the leading sleeve preferred by PCCP tapping contractors. These fabricated tapping sleeves are designed to reinforce the pipe and provide for easy installation and maximum safety. There are many unique features as well as options available on these sleeves. Unique to these sleeves are the following: separate body and tapping outlets, broad cross section gaskets, gusseted pressure plates, combination gland/draw flanges, load bearing set screws, grout seal assemblies and epoxy coated waterways.

Click for more information
	432 All Stainless Steel Tapping Sleeve SALE
	EXTRA BOLTING POWER...The true tapping sleeve design of this sleeve incorporates replaceable, self-aligning bolts; which facilitate conversion of high bolt torques to high gasket pressure. (Can be torqued to 125 ft. lbs.) This increases gasket sealing pressure and pressure holding capability. The extra bolting power assures that the gasket will seal the full circumference of the pipe. This provides insurance against beam breaks in size on size taps. Molded-in recessed bridge plate, assures even gasket pressure throughout the range of the sleeve. Extra strength eliminates possible cracking of the sleeve or flange. Reduced weight speeds installation and reduces the load placed on the pipe. Extra width and the heavier neck and body material provide extra reinforcement of the outlet and extra stability during the tapping process. All stainless construction provides extra corrosion resistance. The stainless steel flange, outlet and body join as one unit of similar metals to provide outstanding structural strength and corrosion resistance.

Click for more information
	452 Heavy Stainless Tapping Sleeve
	The 452 "All Stainless Steel Tapping Sleeve" incorporates the heavy duty design of the fabricated steel tapping sleeve, with the corrosion resistance of all stainless steel. This heavy design utilizes a broad cross section, hydromechanical outlet gasket in lieu of the full body gasket. This outlet gasket provides a positive seal which improves with an increase in line pressure. The 452 has been engineered for installations requiring higher working pressure, a high degree of safety, or longer service life than standard all stainless or cast iron sleeves; and is manufactured to provide the superior corrosion resistance in applications on mains which are not subject to beam breaks.