T1-M Adaptable Tapping Machine

Converts T1-M to Electric power.

Need to replace your old tapping machine but you don't want to replace all those adaptors?

We have the Answer: Its the T1-M

• Plugs into standard 110 outlet
• Built-in drive unit
• Taps all types of pipe quickly and safely
• Machine comes standard with our newly designed 3-rail locking handles for added stability.
• 3/4" - 2" pressure tap-ins
• Upgrade to 3/4" - 4" pressure tap-ins
• Total weight T1M = 28 lbs.
• Mates to your T1-M
• Optional D4 or E series conversion 
• " SORRY NO HAND-CRANK "
• Made in the USA
• For more accessories please scroll down the page.

Operating max pressure 300psi@ 100°F (std.packing)
Operating temperature 250°F @ 250psi
(optional) High temperature kit 495 Deg. F° @ 200PSI., copper flared

“Adaptable to perform up to 4” Hot taps”

Click the images to increase the size. Note that 2LBin can shorten the lengths of the Drive Rails, Feed Screw, and Boring Bars of our machine to match issues that may arise with jobs in tight locations where the application is needed. This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate High Pressure Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T1-AirDrive Tapping Machine Only

The T1-A Tapping machine consists of a 3 rail frame in which the drive unit slides and operates off a 3/4 Horsepower Cleco Air Motor, requiring 90 – 100 PSI air pressure through a minimum 3/8” I.D. hose to create a spindle speed of 225 RPM. Behind the drive motor, the feed assembly slides and locks into place. The packing housing, consisting of 3 O-rings, at the opposite end of the feed assembly, seals around different length boring bars, depending on the travel needed to complete the tap. Different size adaptors screw on to the machine which are sealed by an existing O-ring for convenient size changes.

• Designed by Tappers for Tappers
• Airdrive motor
• Pneumatic
• Built-in drive unit
• Taps all types of pipe quickly & safely
• Machine comes standard with our newly designed 3-rail locking handles for added stability.
• 3/4-4" pressure taps-ins
• 3/4-4" compatible for line stopping
• Total weight T-1 35lbs.
• Made in the USA
• For more accessories please scroll down the page.

Operating max pressure 300psi@ 100°F (std.packing)
Operating temperature 250°F @ 250psi
(optional) High temperature kit 495 Deg. F° @ 200PSI., copper flared

Don't be fooled by cheap imitations, we are the original manufacturer of the T1 series tapping machine!

Click the images to increase the size. Note that 2LBin can shorten the lengths of the Drive Rails, Feed Screw, and Boring Bars of our machine to match issues that may arise with jobs in tight locations where the application is needed. This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate High Pressure Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

HP-104 Tapping Machine Only

HP-104 High Pressure Hot Tap Machine Capabilities

Tap into any pipeline system, without a shut down, with our HP-106 hot tap drilling machine. This high pressure machine is operated manually, electrically, or pneumatically for making hot taps 1/2" - 6". Solid drills range from 1/2"-1 3/8" and hole-saw holders are used for 1 1/2” through 6”.  The HP-106 is designed to perform hot taps with ease and safety. This model is compatible with IPSCO IP100 drilling machine parts and accessories. Video detailing replacement of the high pressure packing is here:) For more information please feel free to call us at 1-800-279-5659

• Designed by Tappers for Tappers
• Taps all types of pipe, boat hulls, steel plates, and concrete walls quickly and safely
• HP-104 high-pressure machine has 18" of travel
• Retains coupon and/or blow off shavings
• 1/2" - 4 " pressure tap-ins
• Pneumatic
• Machine Length: 47” without handle and adaptors
• Total weight of machine is 38lbs. (without cutters or adapters)
• Hand crank provided
• Optional electric power drive
• Optional air drive for flammable environments
• This machine can be used sub sea at working depths
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
1440 psi. @ 100° F
Operating temperature:
700° F @ 700 psi. intermittent.
Max. Continuous rating:
350° F @ 1000 psi.

Multiple drills attached to the HP-104 high pressure tap machine:

Need a Technical Certification of Training? Recently 2LBin.com sold the HP-104 high pressure hot tapping machine package to a company that also wanted to purchase our Technical Certification of Training via our Hot Tapping Specialists Training Program. The Hot tap was successful, coupon was retained and a completion certificate of training was issued. For more information about our hot tapping machines and services please call 1-800-279-5659.

HP-106 Tapping Machine Only

HP-106 High Pressure Hot Tap Machine Capabilities

Tap into any pipeline system, without a shut down, with our HP-106 hot tap drilling machine. This high pressure machine is operated manually, electrically, or pneumatically for making hot taps 1/2" - 6". Solid drills range from 1/2"-1 3/8" and hole-saw holders are used for 1 1/2” through 6”.  The HP-106 is designed to perform hot taps with ease and safety. This model is compatible with IPSCO IP100 drilling machine parts and accessories. Video detailing replacement of the high pressure packing is here:) For more information please feel free to call us at 1-800-279-5659

• Designed by Tappers for Tappers
• Taps all types of pipe, boat hulls, steel plates, and concrete walls quickly and safely
• HP-106 high pressure machine has 28" of travel
• Retains coupon and/or blow off shavings
• 1/2" - 6" pressure tap-ins
• Pneumatic
• Machine Length: 67” without handle and adaptors
• Total weight of machine- 50lbs. (without cutters or adapters)
• Hand crank provided
• Optional electric power drive
• Optional air drive for flammable environments
• This machine can be used sub sea at working depths
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
1440 psi. @ 100° F
Operating temperature:
700° F @ 700 psi. intermittent.
Max. Continuous rating:
350° F @ 1000 psi.

Multiple drills attached to the HP-106 high pressure tap machine:

Need a Technical Certification of Training? Recently 2LBin.com sold the HP-104 high pressure hot tapping machine package to a company that also wanted to purchase our Technical Certification of Training via our Hot Tapping Specialists Training Program. The Hot tap was successful, coupon was retained and a completion certificate of training was issued. For more information about our hot tapping machines and services please call 1-800-279-5659.

T1-8 Electric Hot Tapping Machine Only

• Taps all types of pipe, steel plates, and concrete walls quickly and safely
• Designed by Tappers - for Tappers
• Milwaukee Super Hawg electric drive motor
• 4" - 8" pressure tap-ins
• Total weight of machine- 55 lbs. (without cutters or adaptors)
• Heavy duty gear reduction transmission
• Adaptors available in steel or aluminum
• Up to 41" of travel; custom length boring bars are available for longer travel applications.
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-24E Electric Hot Tapping Machine Only

• Electric drive unit for portability
• Taps all types of pipe quickly & safely
• 3"-8" pressure taps-ins
• 24" of Travel
• Total Length of Machine is 42" Tall Without Adaptor
• Total weight of machine-110 lbs. ( without cutters or adaptors)
• Adaptors available in aluminum or steel
• British Standards Available
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-30E Tapping Machine Only

• Designed by Tappers for Tappers
• Very powerful built in Electric or optional air drive unit
• 30" of travel
• Total Length of Machine is 48" Tall Without Adaptor
• Taps all types of pipe quickly and safely
• 3" - 12" pressure tap-ins
• 3" - 12" compatible with line stopping
• Total weight of machine- 125 lbs. (without cutters or adapters)
• Adapters available in steel or aluminum
• British Standards Available
• Optional air drive for flammable environments
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-30H Tapping Machine Only

• Designed by Tappers for Tappers
• Very powerful built in hydraulic or optional air drive unit
• 30" of travel
• Total Length of Machine is 48" Tall Without Adaptor
• Taps all types of pipe quickly and safely
• 3" - 12" pressure tap-ins
• 3" - 12" compatible with line stopping
• Total weight of machine- 125 lbs. (without cutters or adapters)
• Requires approx. 8 G.P.M. @ 1700 P.S.I.
• Adapters available in steel or aluminum
• British Standards Available
• Optional air drive for flammable environments
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-30 Air Drive Hot Tapping Machine Only

• Designed by Tappers for Tappers
• Very powerful built in air drive unit
• This Air Motor should be operated at 90 psig (6.2 bar/ 620 kPa) air pressure at the inlet with a 1/4” (6mm) air supply hose.
• Operator Handle is a Detented Type F 4 way – 3 position valve with 1/2” NPT ports.
• 30" of travel
• Total Length of Machine is 52" Tall Without Adaptor
• Taps all types of pipe quickly and safely
• 3" - 12" pressure tap-ins
• 3" - 12" Compatible with line stopping
• Total weight of machine- 125 lbs. (without cutters or adapters)
• Adapters available in steel or aluminum
• British Standards Available
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-37H Tapping Machine Only

• Designed by Tappers - for Tappers
• Very powerful built in hydraulic drive unit
• Taps all types of pipe quickly and safely
• 3" - 16" pressure tap-ins for Municipal pipe applications
• 3" - 16" pressure tap-ins for chilled carbon.
• 3" - 16" compatible with line stopping
• 37" of travel
• Total Length of Machine is 55" Tall Without Adaptor
• Total weight of machine- 185 lbs.(without cutters or adaptors)
• Requires approx. 8 G.P.M. @ 1700 P.S.I.
• Adaptors available in steel or aluminum
• British Standards Available
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-37 Air Drive Hot Tapping Machine Only

• Designed by Tappers - for Tappers
• Very powerful built in air drive unit
• This Air Motor should be operated at 90 psig (6.2 bar/ 620 kPa) air pressure at the inlet with a 1/4” (6mm) air supply hose.
• Operator Handle is a Detented Type F 4 way – 3 position valve with 1/2” NPT ports.
• Taps all types of pipe quickly and safely
• 3" - 16" pressure tap-ins for Municipal pipe applications
• 3" - 16" pressure tap-ins for chilled carbon.
• 3" - 16" Compatible with line stopping
• 37" of travel
• Total Length of Machine is 59" Tall Without Adaptor
• Total weight of machine- 185 lbs.(without cutters or adaptors )
• Adaptors available in steel or aluminum
• British Standards Available
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-46 Hydraulic Hot Tapping Machine Only

• Designed by Tappers - for Tappers
• This machine has 46” of travel and performs taps 12” – 24"
• Travel can be increased, if desired, to 60” with the “T46-60 Rail and Boring-bar” package
• Very powerful built-in drive unit
• Tapping machine is hydraulic driven: 16 gallons at 2000 psi. is preferred.
• Machine has patented “Selectable-feed”; 1 speed - for advancing and 1 speed - for cutting
• 3” boring bar for ridged cutting
• Gear driven for precision cutting and dependability
• Dual hydraulic motor drive for non-stop cutting
• T1-M style cutters bolt up with use of an adapter
• 285 psi. working pressure with quoted adaptors.
• 285psi & 250 degrees (F) with provided packing, higher temperatures are available with optional packing
• British Standards Available
• Machine weight is approx 495 lbs.
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-60 Hydraulic Hot Tapping Machine Only

• Designed by Tappers - for Tappers
• This machine has 60” of travel and performs taps 12” – 36" or 300mm - 900mm taps
• Very powerful built in drive unit
• Tapping machine is hydraulic driven: 18 gallons at 2000 psi. is preferred.
• Machine has patented “Selectable-feed”; 1 speed - for advancing and 1 speed - for cutting
• 3 1/2” Boring Bar for ridged cutting.
• Gear driven for precision cutting and dependability
• Dual hydraulic motor drive for non-stop cutting
• 300 psi. working pressure with quoted adaptors.
• 300psi & 100 degrees (F) with provided packing, Higher Temperatures are available with optional packing.
• British Standards Available
• Machine weight is approx 795 lbs.
• Made in the USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water

T-112 Hydraulic Hot Tapping Machine Only

• This HUGE tapping machine has 74"-112” of travel and performs taps 24” – 60”
• Weight approx. 4000lbs
• This hot tap machine has a travel that can be increased to 112” or more with the “T112 rail and boring-bar” package
• This hot tap machine has a very powerful built in drive unit
• Tapping machine is hydraulic driven
• Hot tap machine has patented “Selectable-feed”; 1 speed - for advancing and 1 speed - for cutting
• 5 1/2” Boring Bar and four 3 1/2" support rails for ridged cutting
• Gear driven for precision cutting and dependability
• Dual - quad hydraulic motor drives for non-stop cutting
• T1-M style cutters bolt up with use of an adapter
• 285 psi. working pressure with quoted adaptors
• 285psi & 250 degrees (F) with provided packing, higher temperatures are available with optional packing
• American std & British std adaptors
• Made in USA
• For more accessories please scroll down the page.

Operating max. pressure:
300 psi. @ 100° F
Operating temperature:
250° F @ 250 psi.

This Tapping Machine Taps: Asbestos-Cement Pipe Stainless Steel Pipe Steel Cylinder Pipe Carbon Steel Pipe Ductile Iron Pipe Cast Iron Pipe CMLC Pipe Copper Pipe PVC Pipe Polyethylene Pipe Fiberglass Pipe Transite Pipe Metal Walls Concrete Walls Steel Plate Line Contents Crude Oil Gasoline Natural Gas Domestic Water Reclaimed Water Potable Water Chemicals Wastewater Sewage Steam Chilled Water Heated Water