Line Stopping Machines, Linestop Cups, & Line Plugging Equipment |
|
| Linestop Pipestop-250 Linestop Jackscrew Equipment | |
-Pivoting heads |
|
| Poly Urethane – 12" - 54.6" Linestop Cups | |
|
|
| Buna-N Linestop™ Cups | |
|
|
| EPDM Linestop™ Cups | |
EPDM - Ethylene Propylene Dichloride Monomer 2.5"-12.5" Linestop CupsTemp. Range ° C Temp. Range ° F Notes -40° C to +150° C -40° F to +302° F General use + Steam |
|
| Viton Linestop™ Cups | |
Viton - Fluoroelastomer 2.5"-12.5" Linestop CupsTemp. Range ° C Temp. Range ° F Notes -15° C to +204° C -4° F to +400° F Do not use in Steam
14” and Larger available upon request. |
|
| Pipestop-100 | |
| This low pressure stopping equipment is lightweight and is easily used for stopping lines 4" - 16" on most types of pipelines and fluids. Maximum line pressure: 100 psi. Maximum Temperature: 350° F (121° C) |
|
| Qualitech (QT) LineStopping Machines and Completions Tools | |
| This style of line stopping equipment offers you extra safety while working on a pipeline system. The QT stopper machine and its correct fittings will provide a means of making a positive shutoff in pipelines containing water, oil, or gas up to 300 PSI and 100 degrees. | |
| AWWA - Fittings | |
| The IFT 440 Line Stop Fitting, in sizes 4” - 12”, provides extra reliability through a heavy duty, non-compromising design. By utilizing the “true tapping sleeve design”, we engineered the IFT 440 to withstand the stress and mechanical forces incurred during the linestop procedure. | |
| Linestop Flanged Steel Gate Valves | |
| Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance on the packing, or line pressure surges causes corrosion and failure of most carbon steel or cast iron components. An all stainless steel valve offers better corrosion resistance than cast iron lined valves. The total cost of ownership becomes more attractive than the initial savings. | |
| Flanged Butterfly Tapping Valves | |
| The Dylan Swedge Valve® is a patented revolutionary process for hottaping existing systems; then adding any valve desired. This breakthrough technology enables the tapping of butterfly valves, and also enables tapping without leaving a permanent valve. Likewise, the Dylan Swedge Valve®, if installed in a new system, enables a reliable future isolation point when necessary.
|
|
| Completion Plug Styles | |
| |
|
Leave us a Facebook Comment